Описание оборудования | |
---|---|
HART termination board for K-System HART Multiplexer | |
HART signal channels (non-intrinsically safe) | |
Load resistor | 220 ? , switchable on |
Interface | |
Type | multiplexer connection : 26-pin NFP-26A (Yamaichi) |
Signal lines | |
Rated current | max. 30 mA per channel |
Indicators/settings | |
Control elements | DIP-switch |
DIP switch | selection of operating mode: - ON: without load resistor - OFF: with load resistor |
Factory setting | DIP switches S1 and S2: ON |
Directive conformity | |
Electromagnetic compatibility | |
Conformity | |
Electromagnetic compatibility | NE 21:2012 For further information see system description. |
Degree of protection | IEC 60529:2001 |
Shock resistance | EN 60068-2-27 |
Vibration resistance | EN 60068-2-6 |
Ambient conditions | |
Ambient temperature | 0 ... 50 °C (32 ... 122 °F) |
Storage temperature | -15 ... 50 °C (5 ... 122 °F) |
Relative humidity | ? 93 % non-condensing |
Shock resistance | 15 g , 11 ms |
Vibration resistance | 1 g , 10 ... 150 Hz |
Mechanical specifications | |
Degree of protection | IP20 |
Connection | |
Core cross-section | screw terminals: 0.25 ... 1.5 mm2 (24 ... 16 AWG) |
Mass | approx. 200 g |
Dimensions | 110 x 125 x 67 mm (4.3 x 4.9 x 2.6 inch) |
Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
Data for application in connection with hazardous areas | |
Certificate | PF 11 CERT 1930 X |
Directive conformity |
8 (029) 555-8-000 | |
8 (044) 555-8-000 | |
8 (017) 255-8-000 |